Hongxin steel pill, trustworthy! Welcome to the Hongxin official website

　　The difference between alloy steel shot and low carbon steel shot may be very large. Each specific component has a great influence on its use, advantages and service life. What is the importance of alloy steel shot. Alloy steel shot is a kind of low carbon steel, the content is as low as 0.05-0.25%, low carbon content is widely manufactured, in all carbon steel, Hongxin steel shot should pay attention to the high melting point of steel with high carbon content.

　　On the contrary, the chromium content of alloy steel shot is at least 10.5%, which is not easy to dye, corrode or rust like ordinary steel. There are also various grades of alloy steel shot and surface treatment, which can better adapt to its use environment. When exposed to air and moisture, the steel will rust, and the high chromium in alloy steel shot will produce chromium oxide protective film to prevent oxygen diffusion into the internal structure of metal.

　　Alloy steel shot is widely used in motors and electrical appliances. Although it is not strong enough, its chromium content has additional quality of corrosion resistance and aesthetics. Surface hardening process is very common. When using low carbon steel in corrosive environment, the corrosion resistance is very poor. On the other hand, alloy steel shot has inherent corrosion resistance, adding more hardness and strength. Alloy steel shot is widely used and can be widely recycled. Due to its low carbon content and very usable strength, parts can be prefabricated in the factory stage, and a lot of work has been completed before materials even arrive at the construction.

　　Alloy steel shot has always been one of the main materials of choice in the energy industry. This metal will improve the requirements of environmental protection, prolong the service life, and ensure the structure is essential for the safety of commercial and industrial use. The reprocessing of alloy steel shot increases the additional recovery potential for reconstruction projects, and is a multifunctional and strength product. In order to make these products both safe and reliable, the metal is treated with strict coating and surface treatment, which helps to enhance the service life.