Hongxin steel pill, trustworthy! Welcome to the Hongxin official website

　　Stainless steel shot material can provide the maximum value in the whole life cycle of the manufacturing project. Stainless steel shot is a kind of ferroalloy with chromium content of at least 10.5%. Chromium produces a thin oxide layer on the steel surface, also called passive layer. The steel existing in the steel has corrosion resistance, which can form a durable and invisible surface. Stainless steel shot is not without defects, the initial cost is high, Hongxin steel shot metal must be treated with high-quality equipment.Stainless steel shot material can provide the maximum value in the whole life cycle of the manufacturing project. Stainless steel shot is a kind of ferroalloy with chromium content of at least 10.5%. Chromium produces a thin oxide layer on the steel surface, also called passive layer. The steel existing in the steel has corrosion resistance, which can form a durable and invisible surface. Stainless steel shot is not without defects, the initial cost is high, Hongxin steel shot metal must be treated with high-quality equipment.

　　The stainless steel shot has good corrosion resistance and its inherent rust resistance, which makes the steel shot keep corrosion resistance, while the alloy of different levels will corrode in different environments. For use in wet applications, the alloy with lower grade has the best effect. For use in acid and alkaline solutions, the alloy with higher grade is the better choice.

　　Stainless steel shot is easy to keep clean and becomes an ideal choice for high standard application of sanitary conditions. The long-term value and low life cycle cost of stainless steel shot should not be ignored. Stainless steel shot and other maintenance free products should be selected. Can focus on high-quality technology and products. Stainless steel pellets are known for their heat resistance and are ideal for applications that may be subject to more extreme temperatures.

　　Stainless steel shot is used in various types of projects. Because its surface is polished, it is easier to get scratches and other damages than other metals. It has low thermal conductivity and high expansion rate. In order to avoid deformation, the temperature between channels should be controlled to minimize deformation. When processing stainless steel shot, many different surface pollutants are introduced. When processing stainless steel shot, grease or other materials may be sticky On hand, these contaminants can cause localized corrosion. In order to avoid surface pollution, abrasive designed for grinding, mixing and deburring of stainless steel shot shall be used to keep the abrasive of stainless steel shot separate from that of other metals. Protect as long as possible and store separately from all other metals.